Installation Of The Dmsa-Cbj80/Cbj15/Cbjex - Sony PetaSite DMS-B150L Installation Manual

6-11. Installing the Package Supporting Equipment
6-11-3. Installation of the DMSA-CBJ80/
CBJ15/CBJEX
For the DMSA-CBJ80
1. Connect the harness of the already wired AC outlet to
the terminal (OUT1) of the AC unit (30A) assembly,
through the bottom hole of the frame.
Harness of the already
wired AC outlet
AC unit (30A) assembly
Terminal table screws
(M4 x 8)
Screws
(P3 x 6)
2. Connect the AC IN harness to the terminal (AC IN) of
the AC unit (30A) assembly.
AC Unit (30A) assembly
Terminal table screws
(M4 x 8)
Screws
(P3 x 6)
6-62
4P 4P
AC outlet
Harness (GRN)
Harness (WHT)
Harness (BLK)
Harness (RED)
Harness (WHT)
Harness (BLK)
AC IN harness
3. Install the 4-pin tap bracket to which the AC outlet (4-
pin) is attached, to the specified position of the DMS-
B80L/B110S as shown in the illustration with the two
screws (PWH4 x 8) respectively
AC unit OUT2 side
4-pin tap
bracket
AC outlet (4-pin)
DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
PWH
4 x 8
PWH
4 x 8