Table of Contents
Advertisement
1-1. Overview of Installation
1-1-1. Cautions before Installation
The Hard Disk Drives (HDD) are installed in this unit. The HDD is a precision part. The causes such as
shock, vibration and static electricity to the unit, and the conditions of temperature and humidity may
damage HDD or its data.
Before installation, read fully the following cautions, and perform the installation with extra care.
Cautions about shock and vibration
When transporting and moving
. Pack the unit using the packaging materials specifi ed by the manufacturer.
. Use a proper cart.
. Avoid rough routes, and manage the cart gently.
When placing on a fl oor or table
. Put the unit on stable and horizontal place.
. Do not place the unit near vibrating equipments.
For the unit
. Never hit the unit, and drop the tool on the unit.
Take extra care
. Never give vibration or shock to the unit while the power is turned on, or within about 30 seconds after
turning off the power.
Cautions about rack mounting the unit
. Never give shock to all the rack mounted unit which has a HDD.
Caution about static electricity
. Keep static-producing items such as plastics (air caps or others) away from the working area.
. When touching the HDD unit, be sure to wear a grounded earth-band to protect against static electricity.
Cautions about temperature and humidity
. Temperature and humidity of storage and operating condition must be kept within the correct specifi ed
range.
. Never turn on the power with the cabinet is removed in consideration of the air-cooling effect.
Cautions when an error appears in a HDD
. Treat this unit conform to the above cautions, even when an error appeared.
. Keep the unit in the condition in which the error appeared, and record the details of the error.
XDJ-1000
Section 1
Installation
1-1 (E)
Advertisement
Table of Contents
