Table of Contents
Advertisement
6-7. Prevention of Falling
After installing the console, the console should be fixed to
prevent it falling due to disasters such as earthquakes.
There are two methods to fix the console: fixing from the
ceiling or the post, and fixing on the floor. Fix the console
using either method according to the installation location.
1. Fixing from the Ceiling or the Post
(using the eyebolts)
There are four screw holes to fix the eyebolts (M12) on the
top surface of each console. Attach the eyebolts to the
screw holes and attach a chain or equivalent to the ceiling
or post of the building, then connect it to the eyebolts to fix
the console. (Refer to the detailed drawling (Fig.1) for the
position of holes.)
. Eyebolt
Sony part No. : 2-295-928-01
50
M12
DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
2. Fixing on the Floor (using the fixing metals)
There are two screw holes each for attaching the fixing
screws on the front bottom and on the rear bottom of each
console. Attach the metal fixtures referring to the installa-
tion example shown below and fix the console to the floor.
(For more details, please contact your local Sony Sales
Office/Service Center.) (Refer to the detailed drawing
(Fig.2 to 4) for the position of holes.)
10
25
(Unit : mm)
Plate
Floor fixing bolt
M10 anchor bolt
Insulation bush
6-7. Prevention of Falling
Nut M10
Fixing metal
Fixing bolt M8 x 45
Fixing bolt M8 x 25
Free access
Floor
6-37
Advertisement
Table of Contents
