Sony PetaSite DMS-B150L Installation Manual page 30

6-2. Removal and Installation of the Cabinets
4. Drive stage
Removal
n
Each drive stage has a number on it.
Be sure to attach a removed drive stage to the original
position while referring to the following figure.
4
1
1. Open the drive stage panel. (Refer to "1. Drive stage
panel".)
2. Loosen the two fixing screws.
3. Pull out the drive stage until the right and left lock
levers of the drive stage are locked.
4. While pushing the right and left lock levers of the
drive stage, pull out the drive stage more and remove
it.
Lock lever
Fixing screws
Drive stage
6-4
5 6
2 3
Lock lever
5. Unlock the right and left rails in the direction of the
arrow and push them.
Lock levers
Rail
Installation
Reattach the drive stage in reverse order of disassembling.
DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
Rail