Sony PetaSite DMS-B150L Installation Manual page 33

2. While pulling down portion A shown in the illustration in
the direction of the arrow, remove upward the rear door
from portion B. Then, remove the door from the console.
n
Be careful not to drop the φ 6 poly washer. If it is
dropped, insert it into the pin of portion B as shown in
the figure.
DMS-B150L/B210S
Portion A
Portion B
DMS-B80L/B110S
Portion B
3. Reattach the parts in reverse order of disassembling.
DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
Rear doors
φ 6 poly washer
Portion A
Rear door
φ 6 poly washer
6-3. Removal of the Shipping Metal Fixtures
2. Shipping metal fixture of the Y-axis direction
Removal
1. Remove the four hexagonal head cap bolts (M4 x 8)
and remove the shipping metal fixture (Y).
2. Attach the shipping metal fixture (Y) to the left side in
the direction of the arrow using the two hexagonal
head cap bolts (M4 x 8) that were removed in step (1),
as shown below.
M4 x 8
Shipping
metal
fixture (Y)
M4 x 8
Shipping metal
fixture (Y)
M4 x 8
6-7