Table of Contents
Advertisement
2-1. Unpacking the Console
Unpacking Procedure
1. Cut the four bands.
2. Remove the top cap.
3. Remove the six metal fasteners and remove the panel (front) and panel (rear).
4. Prepare the spacer and standard accessory and remove the plastic bag from the console.
5. Align the forks of the forklift with the forklift labels on the rear of the console, hold up the bottom of
the console and move down from the bottom table.
6. Open the drive stage panel while referring to Section 6-5.
7. Pull out the bottom stage and remove the accessory box.
2-2
DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
Advertisement
Table of Contents
