Sony PetaSite DMS-B150L Installation Manual page 41

8. Move the X rail (top) of extension console in the
direction opposite to the connection side.
(1) Remove the two hexagonal head cap bolts (a) securing
the X rail of the extension console.
(2) Loosen the five hexagonal head cap bolts (b) (4 x 14)
and two hexagonal head cap bolts (e) on the X rail
(top) and connection block.
n
Be careful not to loosen the hexagonal head cap bolts (e)
excessively. Otherwise, the X rail (top) may drop.
Extension console
Connecting
block
(c) M4 x 16
(d) M4 x 12
Connecting
block
Nuts
(b) M4 x 14
(b) M4 x 14
(3) Loosen the three nuts. (User the wrench of size 7 mm)
(4) Loosen the two hexagonal head cap bolts (c) and the
hexagonal head cap bolt (d).
(5) Loosen the hexagonal head cap bolt (d) and the nut
that fix the connecting block of the basic console.
(6) Slide the X rail (top) of the extension console in the
direction of the arrow.
Extension colsole
side
DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
X rail (top)
(a) M4 x 14
X rail (top)
Nut
Rail (T) retainer
plate
(e) M4 x 25
Basic console side
X rail (top)
9. Move the X rail (bottom) of extension console in the
direction opposite to the connection side
(1) Loosen the four hexagonal head cap bolts (M4 x 25)
that fix the X rail (bottom) of the extension console.
n
Be careful not to loosen the hexagonal head cap bolts
(M4 x 25) too loosely. Otherwise, the plate nut may
be fall.
(2) Slide the X rail (bottom) of the extension console in
the direction of the arrow.
6-5. Connecting Extension Consoles
X rail
(bottom)
M4 x 25
M4 x 25
6-15