Sony PetaSite DMS-B150L Installation Manual page 31

5. Front top plate, front base plate, side panels
(FL/FR)
Removal
1. Remove the drive stage panel. (Refer to "1. Drive
stage panel".)
2. Remove the table top. (Refer to "2. Table top".)
3. Remove the stage panel support. (Refer to "3. Stage
panel support".)
4. Remove the drive stage. (Refer to "4. Drive stage".)
5. Loosen the four hexagonal head cap bolts and remove
the two hexagonal head cap bolts on front top plate.
6. Remove front top plate in the direction of the arrow.
mark : Loosen the bolt
(hexagonal head cap bolt M4 x 8)
mark : Remove the bolt (M4 x 8)
(hexagonal head cap bolt M4 x 8)
DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
Front top plate
6-2. Removal and Installation of the Cabinets
7. Loosen the two hexagonal head cap bolts and remove
the two screws on side panel (FL).
8. Remove the side panel (FL) in the direction of the arrow.
9. Loosen the two hexagonal head cap bolts and remove
the two hexagonal head cap bolts on side panel (FR).
10. Remove the side panel (FR) in the direction of the arrow.
Side panel (FL)
mark : Loosen the bolt (hexagonal head cap bolt M4 x 8)
mark : Remove the bolt (hexagonal head cap bolt M4 x 8)
11. Loosen the three hexagonal head cap bolts and remove
the two hexagonal head cap bolts on front base plate.
12. Remove the front base plate.
Front base plate
mark : Loosen the bolt
(hexagonal head cap bolt M4 x 8)
mark : Remove the bolt
(hexagonal head cap bolt M4 x 8)
Installation
Fix all of the parts tentatively first, then tighten the bolts in
reverse order of disassembling.
Side panel (FR)
6-5