Sony PetaSite DMS-B150L Installation Manual page 89

4. Install the AC unit (30A) assembly to the specified
position as shown in the illustration on the rear door of
the DMS-B80L/B110S with the two screws.
AC unit (30A) assembly
DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
Toothed washers 4
PWH
4 x 8
6-11. Installing the Package Supporting Equipment
For the DMSA-CBJ15
1. Pass the harness of the already wired AC outlet and the
AC unit (30A) assembly through the bottom hole of
the frame of the DMS-B150L/B210S, and connect
them to the AC outlet (4-pin) that is connected to the
terminal (AC OUT1) of the AC unit (30A) assembly.
Harness of the already
wired AC outlet
AC unit (30A) assembly
Terminal table screws
(M4 x 8)
Screws
(P3 x 6)
.
2. Connect the AC IN harness to the terminal (AC IN) of
the AC unit (30A) assembly.
AC Unit (30A) assembly
Terminal table screws
(M4 x 8)
Screws
(P3 x 6)
4P 4P
AC outlet
Harness (GRN)
Harness (WHT)
Harness (BLK)
Harness (RED)
Harness (WHT)
Harness (BLK)
AC IN harness
6-63