Table of Contents
Advertisement
12. Align rear end of the server rail with front end of the
slide rail carefully.
n
If you want to slide the server rail along with the slide
rail, be sure that the DMS-PCU1 is in parallel with the
floor. If the DMS-PCU1 is slanted in the top or
bottom, the rail may be damaged.
13. Push in the DMS-PCU1 gently by sliding it. Slide the
DMS-PCU1 to the front until the rail release ratchet
comes into the slide rail.
14 Push in the release ratchets on the both sides of the
DMS-PCU1 inward.
15 Slide the DMS-PCU1 until the PC bracket is complete-
ly pushed in and fix it with the fixing screw.
w
When you push in the PC bracket by sliding the DMS-
PCU1 and by pushing the server rail release ratchet, be
very careful not to get injured. The slide rail can pinch
your fingers.
DMS-PCU1
Server rails
Fixing screws
Release latch
DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
Slide rails
6-11. Installing the Package Supporting Equipment
6-71
Advertisement
Table of Contents
