Table of Contents
Advertisement
For the DMSA-CBJEX
1. When one to three units of the DMS-B150L/
B210S are installed.
(1) Pass the harness (DMS-B150L side) of the already
wired AC outlet (6-pin) through the bottom hole of the
frame to the first DMS-EX150L/EX210S that is
adjacent to the DMS-B150L/B210S, and connect it to
terminal (AC OUT1) of the AC unit (30A) assembly.
DMS-
B150L/B210S
AC unit (30A) assembly
First extension
console
Harness of the already wired AC outlet
Terminal table screws
(M4 x 8)
Screws
(P3 x 6)
(2) Connect the AC IN harness to the terminal (AC IN) of
the AC unit (30A) assembly.
AC Unit (30A) assembly
Terminal table screws
(M4 x 8)
Screws
(P3 x 6)
DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
Harness (GRN)
Harness (WHT)
Harness (BLK)
Harness (RED)
Harness (WHT)
Harness (BLK)
AC IN harness
6-11. Installing the Package Supporting Equipment
(3) Connect the harness of the already wired AC outlet
through the bottom hole of the frame to the AC outlet
of the first extension console.
GRN
AC outlet (6-pin)
First extension
console
Second extension
console
(4) Connect the AC power in the same way as step (3) for
the second and third extension consoles.
WHT
BLK
AC outlet (6-pin)
6-65
Advertisement
Table of Contents
