Table of Contents
Advertisement
2-1-2. Basic Console (DMS-B80L/B110S) and Accessories
Outside view
Top cap
Panel (rear)
Standard
Bottom table
accessory
Supplied accessory
of the package
supporting equipment
Types and quantity of standard accessories
. Operation Manual :
1
. Plug holder :
2
. Tie mount :
20
. Repeat tie :
6
. Tie band :
30
. Screw (PWH4 x 8) : 20
Unpacking Procedure
1. Cut the four bands.
2. Remove the top cap.
3. Remove the six metal fasteners and remove the panel (front) and panel (rear).
4. Prepare the spacer and standard accessory and remove the plastic bag from the console.
5. Align the forks of the forklift with the forklift labels on the rear of the console, hold up the bottom of
the console and move down from the bottom table.
6. Open the drive stage panel while referring to Section 6-5.
7. Pull out the bottom stage and remove the accessory box.
DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
Band
DMS-B80L/B110S
Spacer
Accessory box
Accessory box
Metal fasteners
Forklift labels
Forks of forklift
Supplied accessories
of the package
supporting equipment
Metal fasteners
Panel (front)
Outside dimensions when packed
in package
1280 (W) x 1734 (H) x 1295 (D)
2-1. Unpacking the Console
2-3
Advertisement
Table of Contents
