Sony PetaSite DMS-B150L Installation Manual page 70

6-9. Installation of the Tape Drive
(2) Loosen the two fixing screws of the drive drive stage
and pull out the drive stage until the lock levers of the
right and left rails are locked.
Lock lever
Fixing screws
Handle
Drive stage
(3) Align the legs on the front panel side of the tape drive
with the positioning holes on the back of the drive
stage.
Front panel
Tape drive
6-44
(4) Slide the tape drive to the back of the drive stage.
Lock lever
(5) While pushing the lock levers on the right and left rails
Positioning holes
Drive stage
(6) Tighten the two fixing screws of the drive stage.
(7) Close the drive stage panel of the basic console and fix
Install the tape drive until the legs on the rear panel
side are aligned with the positioning holes on the front
of the drive stage.
Tape drive
Positioning holes
of the drive stage, push in the drive stage.
Lock lever
Drive stage
it with the four screws (with drop-safe).
DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
Drive stage
Lock lever