(3) Loosen the two screws (a) and the screw (b) to remove
the side plate support (top) in the direction of the
arrow. Then, remove the two screws (a).
(a) PWH4 x 8
4. Remove the EX front panel assembly of the extension
console.
(1) Loosen the four screws (with drop-safe) and remove
the EX front panel assembly in the direction of the
arrow.
n
These screws have drop-safe washers. Be careful not
to remove the screws.
DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
Side plate support (top)
(b) PWH4 x 8
RK4 x 25
(with drop-safe)
EX front
panel
assembly
RK4 x 25
(with drop-safe)
5. Remove the drive stage panel of the extension console.
(1) Loosen the two screws (with drop-safe) and open the
drive stage panel.
n
These screws have drop-safe washers. Be careful not
to remove the screws.
(2) Remove the drive stage panel from the pin at portion B
by raising it slightly while pulling portion A in the
direction of the arrow as shown. Remove then the
drive stage panel from the console.
n
Be careful not to drop the φ 6 poly washer. If it is
dropped, insert it into the pin of portion B as shown in
the figure.
RK4 x 25
(with drop-safe)
6-5. Connecting Extension Consoles
Portion A
Drive stage panel
φ 6
poly washer
Portion B
6-13