Sony PetaSite DMS-B150L Installation Manual page 58

6-6. Installation of DMSA-CBL1
4. Fix the cable relay plate (EXD) to the second exten-
sion console with the three screws (PWH 4 x 8).
5. Route the five types of cables under the EX stage
support and extend them to the basic console.
Cable relay plate (EXD)
6. Attach the flat cable connector to the floor of the first
extension console with the two screws (PS3 x 10)
7. Install the four locking adjust clamps to the first
extension console.
Flat cable
Locking adjust clamp
6-32
PWH4 x 8
Locking adjust clamp
PS3 x 10
8. Connect the five types of cables to the mating cables
of the basic console.
9. Fix the four types of cables with the six locking adjust
clamps.
Locking adjust clamps
10. Attach the SV cable cover (EXD1) with the two
screws (PWH4 x 8). (The first and the second exten-
sion console)
n
Be careful not pinch the cables and harnesses with the
edge of the SV cable cover (EXD1).
DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
Locking adjust clamps
PWH4 x 8
SV cable covers (EXD1)