Table of Contents
Advertisement
1-4. Cable relay plate
(1) Remove the four screws.
(2) Remove the two connectors from the cable relay plate.
PWH4 x 8
2. Wiring the Cables on the Extension Console
Floor
1. Attach the CB-106 board and the screws to the cable
relay plate (EXD), that are removed from the basic
console.
Cable relay plate (EXD)
PSW3 x 8
PSW3 x 8
DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
Cable relay plate
PWH4 x 8
CB-106 board
2. Attach the five types of cables to the cable relay plate
(EXD). (Insert the flat cable to CN2 of the CB-106
board.)
3. Route the five types of cables under the EX stage
support of the second extension console.
6-6. Installation of DMSA-CBL1
Cable relay plate (EXD)
Holes
CN2 :
CB-106 board
Flat cable
EX stage support
6-31
Advertisement
Table of Contents
