Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
– Release screws -arrows- and remove engine oil cooler -1-.
Install
Installation is carried out in the reverse order. When installing,
observe the following:
– Insert new O-rings.
– Installing the intake manifold
⇒ "3.2 Removing and installing intake manifold", page 241
– Replenish coolant
⇒ page 151
Tightening torques
Component
Screw for engine oil cooler
136
Rep. gr.17 - Lubrication
.
Nm
8 Nm + torque
a further 90°
1
(
/ 4 turn)
.