Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
2
Charge-air system
⇒ "2.1 Summary of components - charge air system", page 228
⇒ "2.2 Removing and installing charge pressure sender GX26 ",
page 229
⇒ "2.3 Removing and installing charge air cooler", page 230
⇒ "2.4 Checking the charge-air system for leak tightness",
page 232
2.1
Summary of components - charge air system
Note
Before a test or repair, inspect all charge air pipes, charge air hoses and vacuum lines for tight connection
♦
and leak tightness.
Observe rules for cleanliness
♦
1 - Coolant hose
2 - Bolt
❑ thread forming
❑ position and screw in by
to allow the screw to find
the old thread. Next,
tighten screw to the giv‐
en tightening torque.
❑ 15 Nm
3 - Coolant hose
4 - Coolant hose
5 - Charge air cooler
❑ installing and removing
⇒ "2.3 Removing and in‐
stalling charge air cool‐
er", page 230
❑ fill with fresh coolant af‐
ter replacing
6 - Sealing lip
7 - Gasket
❑ replace after removal
8 - Intake manifold
installing and removing
⇒ "3.2 Removing and installing
intake manifold", page 241
9 - Screw
❑ Tightening torque and
tightening order
⇒ "3.1 Assembly over‐
view - intake manifold",
page 240
10 - O-ring
❑ replace after removal
228
Rep. gr.21 - Turbocharging/supercharging
⇒ "3.1 Rules of cleanliness", page 7
.