Skoda Octavia III 2013 Workshop Manual page 73

8 - Bolt
❑ Tightening torque and tightening order
9 - Bolt
❑ replace after removal
❑ Loosening order ⇒ page 72
❑ Tightening torque and tightening order
Cylinder head - tightening torque and tightening order
Note
Replace screws which have been tightened firmly to a torque an‐
gle.
– Tighten screws in steps in the given sequence:
Stage Screws
1st -1 ... 10-
2nd -1 ... 10-
3rd -1 ... 10-
4th -1 ... 10-
Checking cylinder head for distortion
– Inspect cylinder head at several points for distortion using a
500 mm knife-edge straightedge - VAS 6075- and feeler
gauge.
• Maximum permitted distortion: 0.05 mm.
⇒ page 69
⇒ page 67
Tightening torque/torque angle
40 Nm
90° (torque a further 90° (
90° (torque a further 90° (
90° (torque a further 90° (
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
1
/ 4 turn)
1
/ 4 turn)
1
/ 4 turn)
67
1. Cylinder head