Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
– Undo screw -arrow- and place charge air cooler pump - V188-
to one side.
– Pull off hose -3- for crankcase ventilation.
– Unlock -1- oil separator cover at catches -2- -arrow- and re‐
move.
– Loosen the screws in the sequence -9...1- and unscrew them.
– Loosen oil separator carefully from the bonding.
Install
Installation is carried out in the reverse order. When installing,
observe the following:
WARNING
Wear protective gloves when working with sealant and grease
remover!
– Remove the remaining sealant on the cylinder block and on
the oil pan with chemical sealant remover.
– Degrease the sealing surfaces.
Caution
There is a risk of contamination of the lubrication system.
♦ Cover open parts of the engine.
138
Rep. gr.17 - Lubrication