Removing And Installing Automatic Glow Period Control Unit J179; Removing And Installing Hall Sender G40 - Skoda Octavia III 2013 Workshop Manual

– Place the glow plug connectors -1- back onto the glow plugs
-arrows-.
Note
Make sure the glow plug connectors fit tightly.
Tightening torques
♦ ⇒ "1.1 Summary of components - preheating system ",
page 420
1.3 Removing and installing automatic glow
period control unit - J179-
Removing
– Unlock catches -arrows-, remove cover.
– Remove automatic glow period control unit - J179- -arrow-
from the socket in the e-box engine compartment.
Install
Installation is carried out in the reverse order.
1.4 Removing and installing Hall sender -
G40-
Removing
– Remove engine cover
⇒ "1.1 Removing and installing engine trim panel", page 10
Volkswagen Technical Site: http://vwts.ru http://vwts.info
огромный архив документации по автомобилям Volkswagen, Skoda, Seat, Audi
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
Octavia III 2013 ➤ , Octavia III 2014 ➤
.
423
1. Glow Plug System