Skoda Octavia III 2013 Workshop Manual page 260

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
Note
When sliding on the injector the combustion chamber sealing ring
is widened. It must therefore be reduced in width again in two
steps, as described below.
– Press calibrating sleeve -T10133/7- with a gentle rotary move‐
ment (approximately 180°) up to the stop on the injector.
– Turn calibrating sleeve -T10133/7- off again in the opposite
direction.
– Press calibrating sleeve -T10133/8- with a gentle rotary move‐
ment (approximately 180°) up to the stop on the injector.
– Turn calibrating sleeve -T10133/8- off again in the opposite
direction.
254
Rep. gr.24 - Mixture preparation - injection