Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
Caution
Risk of malfunctions caused by soiling.
♦
⇒ "3.1 Rules of cleanliness", page 7
Note
Place a cloth below to absorb leaking fuel.
– Unscrew union nuts -arrows- and remove high pressure line.
Install
Installation is carried out in the reverse order. When installing,
observe the following:
– Moisten thread of union nuts with clean engine oil.
– Hand-tighten union nuts for high pressure pipe, ensure that
the fit is tension-free.
– Tighten union nuts.
– Install throttle valve module - GX3-
⇒ "3.3 Removing and installing the throttle valve control unit
GX3 ", page 244
.
Tightening torques
Component
Union nut
264
Rep. gr.24 - Mixture preparation - injection
Nm
25 Nm