Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
– Push sealing ring -1- over the receiver tube -T10478/3- onto
the guide bushing -T10478/2- .
•
Fitting position: Closed side of sealing ring points to the re‐
ceiver tube.
– Disconnect receiver tube and guide bushing.
– Place guide bushing -T10478/2- with sealing ring -1- onto the
camshaft.
– Pull sealing ring with thrust piece -T10478/1A- and screw -
T10478/5- for camshaft sprocket as far as it can go.
– install (set the timing)
⇒ "2.4 Remove the toothed belt from the camshaft",
page 86
.
3.4.2
Removing and installing the camshaft
sealing ring for the exhaust camshaft
Special tools and workshop equipment required
♦ Assembly tool - T10478 B- with screw -T10478/5-
♦ Extraction hook - T20143/1-
Removing
– Remove the toothed belt from the camshafts
⇒ "2.4 Remove the toothed belt from the camshaft",
page 86
.
116
Rep. gr.15 - Cylinder head, valve gear