Skoda Octavia III 2013 Workshop Manual page 194

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
12 - Mounting bracket
❑ For fuel pump control unit -J538-
❑ Removing and installing fuel pump control unit -J538-
⇒ "1.8 Removing and installing fuel pump control unit J538 ", page 210
13 - Support
❑ for vehicles with auxiliary heating
❑ for dosing pump -V54-
❑ pay attention to correct fit of the dosing pump in the holder
14 - Fuel feed line
❑ to the engine
❑ pushed into the fuel tank
❑ do not kink
❑ Fit so that it can be heard clicking into place
❑ Unlock the quick couplings and fit together
15 - Fuel line
❑ for vehicles with auxiliary heating
❑ to the dosing pump -V54-
❑ do not kink
❑ Fitting position ⇒ Heating, Air Conditioning; Rep. gr. 82
❑ Check the quick coupling for firm seating by pulling in the opposite direction!
❑ Unlock the quick couplings and fit together
16 - Dosing pump -V54-
❑ for vehicles with auxiliary heating
Earth connection for fuel filler neck
– Connect earth connection as shown in the illustration.
– Ensure proper seating of plug connection.
♦ Plug -2- of the earth connection on the threaded ring -3- of the
fuel filler neck.
– Unhook contact peg -1- of the earth connection in the securing
bore on the fuel tank -4- and press in the distance sleeve -5-.
WARNING
Risk of explosion from electrostatic charge.
♦ After installing, use an ohmmeter to test the electrical con‐
nection of the plate ring on the fuel filler neck at a bare
point on the body.
♦ Specified value approximately 0 Ω.
188
Rep. gr.20 - Fuel supply system
⇒ "2 Separating push-on couplings", page 211
⇒ "2 Separating push-on couplings", page 211