Removing And Installing Automatic Glow Period Control Unit J179; Removing And Installing Hall Sender G40 - Skoda Karoq 2018 Workshop Manual

Karoq 2018 ➤ , Kodiaq 2017 ➤
1.6/85; 2.0/110; 130; 140 kW TDI CR engine - Edition 06.2017
– Place the glow plug connectors -1- back onto the glow plugs
-arrows-.
Note
Make sure the glow plug connectors fit tightly.
– Install the engine cover
⇒ "3.1 Removing and installing engine trim panel", page 34
Specified torques
♦ ⇒ "1.1 Summary of components - Glow plug system",
page 487
1.3 Removing and installing automatic glow
period control unit - J179-
Removing
– Unlock catches -arrows- and remove cover.
– Remove automatic glow period control unit - J179- -arrow-
from the fuse location in the e-box engine compartment.
Installing
Installation is carried out in the reverse order.
1.4 Removing and installing Hall sender -
G40-
Removing
– Remove engine cover
⇒ "3.1 Removing and installing engine trim panel", page 34
490
Rep. gr.28 - Glow plug system
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
.
.