Skoda Octavia III 2013 Workshop Manual page 123

– Unscrew screw -2- and remove camshaft sprocket.
– Remove seal -1- using extractor hook -T20143/1- .
Install
Note
Do not oil new sealing ring.
– Push sealing ring -1- over the receiver tube -T10478/3- onto
the guide bushing -T10478/2- .
• Fitting position: Closed side of sealing ring points to the re‐
ceiver tube.
– Disconnect receiver tube and guide bushing.
– Position guide bushing -T10478/2- with seal -1- on camshaft.
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
117
3. Valve gear