Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
– Pull sealing ring -2- in to the stop using the thrust piece -
T10485/1- and the belt pulley screw -1-.
– Fit crankshaft toothed belt pulley onto the crankshaft.
•
The contact surface between the V-ribbed belt pulley crank‐
shaft and crankshaft toothed belt sprocket must be free of oil
and grease.
•
Milled surface -arrow- on the crankshaft toothed belt must be
positioned on the crankshaft stub.
– install (set the timing)
46
Rep. gr.13 - Crankshaft group
⇒ page 105
.