– Make sure that on the gearbox side the edges of the support‐
ing arm -2- and gearbox support -1- are parallel.
•
Dimension -x- = dimension -x-.
– Tighten gearbox mount screws.
Installation is carried out in the reverse order.
Tightening torques
♦
⇒ "2.1 Unit mounting - summary of components", page 26
♦
⇒ "2.1 Summary of components - charge air system",
page 228
♦
⇒ "2.1 Assembly overview - air filter housing", page 238
♦ Battery tray ⇒ Electrical system; Rep. gr. 27
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
33
2. Assembly bracket