Skoda Octavia III 2013 Workshop Manual page 138

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
– Unscrew securing bolts -arrows- and remove tensioning ele‐
ment.
– Remove the generator ⇒ Electrical System; Rep. gr. 27 .
– Removing gasket ring for crankshaft on belt pulley side
⇒ "1.6 Renewing crankshaft oil seal - belt pulley end",
page 44 .
– Unscrew oil pump securing bolts -1- and -2-.
– Pull oil pump off dowel pins on cylinder block in a straight line.
– Remove gasket -1- from dowel pins -arrows-.
Install
– Fit new gasket -1- onto dowel pins -arrows-.
132
Rep. gr.17 - Lubrication