Skoda Octavia III 2013 Workshop Manual page 117

– While doing so, insert camshaft control -T10494- to stop into
camshafts and tighten screw -arrow- hand-tight.
If it is not possible to insert the camshaft clamp -T10494- , the
timing is NOK:
– Repeat control time settings.
If it is possible to insert the camshaft clamp -T10494- , the timing
is OK:
– Unscrew positioning screw - T10340- .
– Unscrew bolt -arrow- and remove camshaft clamp -T10494- .
– Pre-tighten screws -1-, -2- to final tightening torque
⇒ "2.2 Summary of components - toothed belt", page 80
do so use counterholder - T10172- with adapters -T10172/2-
and -T10172/1- .
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
, to
111
2. Toothed belt drive