Chapter 5: Coverage Information; Out Of Range - Avaya D100 Installing And Administering

Chapter 5: Coverage information

Out of range

When the handset is in an Idle state and the display reads Searching it means that the handset
cannot find its base station as it is most likely out of range. If you press the Regist soft key, the
handset enters the registration mode to register to the new base station. To complete registration,
the base station must also be put in registration mode. When the new registration is successful the
handset overwrites the previous registration information. If the new registration is unsuccessful,
nothing changes.
Use the following sections to troubleshoot various out of range scenarios.
Out of range while establishing an RF link
If you press a button but the handset cannot establish an RF link with the base station, the
handset emits an error tone and the display reads Out of Range.
Out of range while talking
If the handset does not receive a signal from the base station in approximately five seconds, the
handset terminates the call and the handset reverts to the Searching mode.
Likewise, if the base station does not receive a signal from the handset in approximately five
seconds, the base station terminates the call.
Out of range while configuring
If the handset cannot receive a signal and reverts to an out of range state while configuring
settings in the menu, the handset does not save any of the settings configured prior to
confirmation.
April 2020 Installing and Administering D100 SIP Wireless Phones 48