Avaya D100 Installing And Administering page 34

Hardware preparation and installation
Related links
Base station installation
Mounting the base station
You can mount the base station on a wall or ceiling, or set on a flat surface. Prior to mounting the
base station, consider the following:
• A location that is higher than cubicle wall height provides better coverage.
• The base station must be readily accessible for resetting and registration procedures.
• The base station receives power through PoE, so the base station must be within range of
the Ethernet cable providing the power.
Beware of metal surfaces or concrete thickness greater than 3 feet (1 meter) that might cause
signal interference.
Note that multiple base stations in the same location must be at least 17 feet (5 meters) away from
each other.
Ensure that you register the appropriate repeaters prior to mounting the base station in the
environment. Registering repeaters prior to mounting the base station helps to avoid signal
disruptions and unnecessary traveling between repeater and base station. See
registration on page 43.
April 2020
on page 31
Installing and Administering D100 SIP Wireless Phones
Repeater
34