Hardware preparation and installation
2. Gently remove the adapter cover from the back of the repeater by pushing in and up on the
ribbed section, indicated by an arrow in the following image.
3. Plug the AC adapter connector into the yellow adapter opening, as in the following image:
4. Without inserting the cover on an angle, carefully replace the adapter cover, and press on
it until you hear it click.
5. Mount the repeater on the mounting screws installed in step 1.
6. Plug the power supply into the nearby outlet and dress the power cable.
For EU models, install the appropriate plug into the repeater power supply adapter.
7. If the repeater is registered, ensure that the repeater connects properly with the base
station. If it is not registered, see
If the repeater links from another repeater, ensure that the linking repeater is installed,
registered, and connected.
April 2020
Repeater registration
Installing and Administering D100 SIP Wireless Phones
on page 43.
46