Avaya D100 Installing And Administering page 55

Note:
If you press the Deflt soft key, the handset provides the factory setting PIN (3 1 0 0)
and requests confirmation. Select Yes to confirm or No to return to the menu list.
3. If you entered a new PIN, press the OK soft key to save the PIN to the base station.
If the PIN change is successful, the handset emits a confirmation tone and the display
reads Saved. Otherwise, the display reads Failed.
Related links
Administrator settings
Administrator password change
Only an administrator can change the administrator password using the following procedure.
Procedure
1. From the Administrator Setting menu, use the Next and Prev keys to navigate to
Password Change and press the Select soft key.
The system provides a confirmation message.
2. Press Yes to change the password.
3. Enter the new administrator password.
The maximum password length is eight characters, but you can enter an empty password.
To change the password back to the default setting (7 8 2 8 8 7 6), press the More.. soft
key during password entry and select Deflt.
4. If you change the password, the handset prompts you to re-enter the password as
confirmation. Enter the password a second time and press the OK soft key. If you change
the password back to the default setting, confirm the change using the OK soft key.
If successful, the display reads Saved for three seconds. Otherwise, the display reads
Failed for the same duration. You then return to the menu list.
Related links
Administrator settings
Diagnostics
The following table contains a summary of the diagnostics available for the D100 base station. If
any of the following diagnostic checks fail to complete, reboot the base station. If problems persist,
the hardware might need replacing.
The administrator performs the diagnostic checks on the handset through the Diagnostics menu,
which only the administrator can enter.
April 2020
on page 53
on page 53
Installing and Administering D100 SIP Wireless Phones
Overview
55