Identify the status display in the D160 Handset Writer.
4. In the D160 Handset Writer, click the Port Scan button to populate the list of newly
available ports.
The Writer application highlights and selects the port number allocated in the Upgrade Jig.
5. Connect the Upgrade Jig to the handset using the headset jack and remove the battery
from the handset.
6. Click the Start button on the Writer application, then reinstall the battery.
The writing begins. The writing process should take less than a minute to complete.
If the handset was not detected by the application, the status display reads Handset not
detected.
7. If successful, the status display reads Update complete.
If unsuccessful, the status display reads Update failed. If the update fails:
• Check the connection between the Upgrade Jig and the handset.
• Ensure that the handset has a fully-charged and compatible battery.
Related links
Overview
on page 49
April 2020
Installing and Administering D100 SIP Wireless Phones
Overview
71