Avaya D100 Installing And Administering page 35

Standing the base station on a flat surface:
• To stand the base station on a flat surface, first plug the Ethernet cable into the slot on the
back of the base station until you hear it click.
• With the Ethernet cable connected, snap the base attachment into the bottom of the base
station and route the cable through the slot in the stand.
• Stand the base station vertically on its base and ensure that the Ethernet cable is not
disrupted.
Mounting the base station on a wall or ceiling:
To mount the base station on a wall or ceiling, use the following procedure. Note that you will not
require the base attachment.
April 2020 Installing and Administering D100 SIP Wireless Phones
Overview
35