Updating Base Station Firmware - Avaya D100 Installing And Administering

The Reboot Base Station option is available under the Setting Menu in the left navigational
pane.
After rebooting the base station, the base station reverts to factory default settings. Rebooting the
base station clears the following parameters from the base station:
• Configuration file information (D100.cfg, D100settings.txt, D100prov.txt, Language file)
• User login information
• Log (System log)
• Local directory
• Call log
Related links
Base Station Web Management Interface

Updating base station firmware

IP Office automatically updates the D100 base station firmware, but only if IP Office Manager is
configured such that the system's memory card is the source for the files used by the D100.
In IP Office Manager, navigate to the System > System tab and ensure that the Phone File
Server Type is set to Memory Card, as the following image demonstrates.
Once the correct Phone File Server Type is set, IP Office can automatically upgrade the base
station firmware when IP Office reboots. The firmware downgrade procedure uses the same
method and requires the same configuration in IP Office Manager.
April 2020
on page 65
Installing and Administering D100 SIP Wireless Phones
Overview
69