Avaya D100 Installing And Administering page 19

Sip wireless phones ip office

Hide thumbs Also See for D100:

Table of Contents

3. Configure Base Name and Base MAC Address. You do not need to configure the MAC

address if only one base station is configured.

4. Click the VoIP tab and configure the VoIP parameters. You can modify the default values if

necessary.

Note that the D100 supports only G.711 codecs.

5. Press OK .

Note:

On the System > LAN1 > VoIP tab, ensure that the SIP Registrar Enable check box

is selected.

Next steps

Configure at least one extension to associate with the SIP DECT line. See

extensions

on page 20.

Table of Contents

D160