Avaya D100 Installing And Administering page 58

Administration and maintenance
Procedure
1. From the Administrator Setting menu, use the Next and Prev keys to navigate to Error
Information and press the Select soft key.
The handset display lists the error message(s).
2. Press the Back soft key or the Off-Hook button to return to the menu list.
Related links
Administrator settings
Network settings
Press the More.. soft key twice and press the Config soft key to enter the Network menu.
In the Network menu, you can view various network parameters in read-only mode. You can only
edit the network settings if you correctly enter the administrator password at the prompt.
You should only configure network settings in troubleshooting scenarios where IP Office Manager
and System Status Application are unavailable.
The following submenus are available under the Network menu:
• MAC Address
• IP Address
• Subnet Mask
• DHCP Setting
• Default Gateway
For the changes to take effect, reboot the base station after you make changes to the network
parameters.
Caution:
Do not attempt to change IP parameters on the D100 without careful instruction. Be cautious
when configuring network settings so as not to corrupt the configuration file.
Procedure
1. From the main menu, use the Next and Prev soft keys to navigate to Network and press
the Select soft key.
2. Enter the administrator password, if available.
If you input an incorrect password, the menu opens in read-only mode.
Related links
Administration on the handset
MAC address on page 59
IP address on page 59
Subnet mask on page 60
April 2020
on page 53
• SIP Controller
• Ping Reply Setting
• Destination Unreachable
• Ethernet Information
• Statistic Information
on page 53
Installing and Administering D100 SIP Wireless Phones 58