Avaya D100 Installing And Administering page 61

Related links
Network settings
Default gateway
View and edit the default gateway using the following procedure.
Procedure
1. Access the Network submenu, navigate to Default Gateway, and press the Select soft
key.
The handset display shows the default gateway.
For example: Gateway: 192.168.100.1
2. Administrators have the option to edit the address using the Edit soft key. Otherwise, you
can only view the default gateway menu in read-only mode and you will not be able to
perform the following steps.
3. If you press Edit, you can enter the default gateway manually using the keypad.
4. When you are satisfied with the address, press the OK soft key.
If you enter an invalid default gateway address in step 3, the handset emits an error tone.
5. If the address is valid, the handset requests confirmation to complete the change. Press
Yes to complete the change, or press No to cancel the change.
In either case, the handset returns to the menu list.
Related links
Network settings
SIP controller
You can view and edit the SIP controller settings using the following procedure.
Procedure
1. Access the Network submenu, navigate to SIP Controller, and press Select.
The handset display shows the SIP controller IP address.
For example: SIP: 192.168.100.100
2. Administrators can edit the SIP controller IP address using the Edit soft key. If you are not
an administrator, you can only view and exit the SIP controller menu in read-only mode
and you will not be able to perform the following steps. Similarly, if DHCP is enabled, the
Edit soft key will not be available.
3. If you press Edit, you can enter the SIP controller IP address manually using the keypad.
4. When you are satisfied, press the OK soft key.
If you entered an invalid address in step 3, the handset emits an error tone.
April 2020
on page 58
on page 58
Installing and Administering D100 SIP Wireless Phones
Overview
61