Chapter 6: Administration And Maintenance; Overview; Systemstatusapplication - Avaya D100 Installing And Administering

Sip wireless phones ip office
Hide thumbs Also See for D100:
Table of Contents

Advertisement

Chapter 6: Administration and maintenance

Overview

The following sections contain all of the relevant information pertaining to the administration and
maintenance of a D100 device.
Use System Status Application (SSA) as the preferred method to monitor and check the status of
D100 systems after they register to IP Office. Prior to registration, you must use IP Office Manager
to administer the system. SSA provides real-time status, historic utilization, and alarm information
for ports, modules, and expansion cards on the system. Using SSA, you can refresh the base
station, reset to factory defaults, register handsets, and more.
You can also perform various administrative actions on the D160 handset. However, you should
only perform administration on the handset in troubleshooting scenarios where you cannot reach
IP Office Manager but you need to determine settings on the device. Some of the administrative
changes you make on the handset revert when the base station reboots.
You can use the Base Station Web Management Interface to access various management
functions on the D100, including configurations, logging information, rebooting, and updating
firmware. Note that you must be an administrator in order to view and utilize the Base Station Web
Management Interface due to the sensitivity of the information contained within. Much like
performing administrative actions on the handset, rebooting the base station overwrites the
changes made using the Base Station Web Management Interface.
Use the information in the following sections to administer and maintain the system, as well as to
update the base station and handset firmware.
Related links

SystemStatusApplication

Administration on the handset
Base Station Web Management Interface
Updating base station firmware
Updating handset firmware
SystemStatusApplication
System Status Application (SSA) is a diagnostic tool for system managers and administrators to
monitor and check the status of IP Office systems, locally and remotely. Avaya recommends using
April 2020
on page 49
on page 53
on page 65
on page 69
on page 70
Installing and Administering D100 SIP Wireless Phones
49

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

D160

Table of Contents