8. Navigate to the Telephony > Supervisor Settings tab and configure the Login code for
the user.
9. Press OK.
Next steps
If necessary, configure additional extensions and users.
Related links
Configuring the D100 using IP Office Manager
Configuring the static IP parameters for the base station
If the base station IP address is statically assigned, you must configure IP Office with the address
of the base station.
Procedure
1. In IP Office Manager, open the Line menu for the desired IP Office control unit and select
the SIP DECT line dedicated to the base station.
2. In the SIP DECT Line window, enable the Configure Base IP settings and uncheck the
DHCP Client checkbox.
3. Configure the parameters for IP Address, IP Mask, IP Gateway, and Provisioning
Server.
April 2020
on page 17
Installing and Administering D100 SIP Wireless Phones
Configuring the D100 using IP Office Manager
21