Avaya D100 Installing And Administering page 60

Administration and maintenance
Related links
Network settings
Subnet mask
You can view and edit the subnet mask using the following procedure.
Procedure
1. Access the Network submenu, navigate to Subnet Mask, and press the Select soft key.
The handset display shows the subnet mask.
For example: Subnet: 255.255.255.0
2. Administrators have the option to edit the subnet mask using the Edit soft key. Otherwise,
you can only view and exit the subnet mask menu in read-only mode and you will not be
able to perform the following steps.
Similarly, if DHCP is enabled, the Edit soft key will not be available. In this case, press the
Back soft key to return to the previous menu.
3. If you press Edit you can enter the subnet mask manually using the keypad.
4. When you are satisfied, press the OK soft key.
The handset emits an error tone if you entered an invalid subnet mask in step 3.
5. If the subnet mask is valid, the handset requests confirmation to complete the change.
Press Yes to complete the change and No to cancel the change.
In either case, the handset returns to the menu list.
Related links
Network settings
DHCP setting
View and edit (enable or disable) the DHCP setting using the following procedure.
Procedure
1. Access the Network submenu, navigate to DHCP Setting, and press the Select soft key.
The handset display shows the DHCP setting. The default value is On.
Press the Back soft key or the Off-Hook button to return to the menu list.
2. Administrators can enable or disable DHCP by selecting either DHCP Enable or DHCP
Disable using the Select soft key. If you did not enter the administrator password, you can
only view the DHCP setting in read-only mode.
After selecting a new setting, a confirmation message displays on the handset for three
seconds.
The handset emits a confirmation tone before returning to the menu list.
April 2020
on page 58
on page 58
Installing and Administering D100 SIP Wireless Phones 60