Avaya D100 Installing And Administering page 40

Hardware preparation and installation
By default, the administrator password is 7 8 2 8 8 7 6 (or 'QUATTRO'). For more
information, see
Only one handset per base station can enter the Administrator Setting menu at any
given time. Attempts to enter the menu on additional handsets result in the message
Denied.
4. After the password is authenticated, navigate to Deregistration and press Select.
The display shows the handset information, which includes the handset number and the
user extension number, if a user is logged in.
5. Scroll through the list of handsets using the Next and Prev soft keys. Select one of the
handsets for de-registration using the Select soft key.
An asterisk (*) next to the handset number in the list identifies the handset in use.
The following table identifies the handset states relative to the Extension Number field:
No. Handset state
1 Not registered
2 Registered but not logged in *
3 Registered and logged in *
* You can de-register a handset whether or not its user is logged in, and whether or not a user is
associated with the device. Attempting to de-register a handset that is not registered results in an
error tone and you will not be able to proceed to the next step.
** <extension number> represents the actual extension number of the user who is logged in.
6. Select the handset you wish to de-register and press OK to execute de-registration. Press
Back to quit de-registration and return to the menu list.
7. After de-registration, the handset emits a confirmation tone and displays a message for
three seconds that reads Deregistered:#1 before returning to the menu list.
The handset, in this case handset #1, enters an unregistered state.
Related links
Handset registration
De-registering a handset using System Status Application
You can also perform handset de-registration using System Status Application (SSA). Use the
following procedure. Note that de-registration does not affect calls in progress.
Procedure
1. Open System Status Application and select the base station to which the handset is
registered under System > SIP DECT Base Stations.
2. Highlight the handset you wish to de-register.
3. Click the Unregister Handset button.
April 2020
Administrator settings
on page 38
Installing and Administering D100 SIP Wireless Phones
on page 53.
Extension Number field
Not displayed on the handset de-registration list
Empty
<extension number> **
40