Avaya D100 Installing And Administering page 68

Sip wireless phones ip office

Hide thumbs Also See for D100:

Table of Contents

Administration and maintenance

Related links

Base Station Web Management Interface

Using SSL VPN

In some network deployment scenarios, the IP Office and the base station are located remotely

from the administrator. In this case, an administrator can obtain base station logs using a Secure

Sockets Layer Virtual Private Network (SSL VPN) to remotely access IP Office and LAN devices.

For information on configuring a SSL VPN tunnel, see the

In addition to setting up a SSL VPN, you must use the following procedure to configure Network

Address and Port Translation (NAPT) rules for each VPN tunnel using IP Office Manager. Note

that each base station receives an entry in the NAPT table.

Procedure

1. In the IP Office Manager navigation list, select Service.

2. In the Service list, select the SSL VPN service where you want to configure NAPT rules.

3. In the details pane for the service, select the NAPT tab.

4. Under Application, open the drop down list and select Custom.

The Protocol and Internal Port Number fields are automatically filled with the default

values.

5. Modify the External Port Number field.

6. Repeat steps 4 and 5 to configure rules for additional base stations.

7. (Optional) To delete an NAPT rule, use the empty column on the left side of the table.

Right-click in the empty cell next to the rule you want to delete and select the Delete

option.

Next steps

Access each base station remotely using the VPN tunnel IP address and the external port number

configured in the NAPT rules table in IP Office Manager. The VPN tunnel address must include

the external port in the format:

http://<tunnel IP address>:<external port>

information

on page 66.

Table of Contents

D160