Avaya D100 Installing And Administering page 14

Hardware and display elements
Soft key
Config
123
abc
Base station LED
The base station has two LEDs. The green LED indicates the connection status, and the blue LED
indicates the base station operating mode.
Green LED state
On
Off
Flashing
Blue LED state
On
Off
Flashing (300ms on,
300ms off)
Flashing (200ms on,
200ms off)
Flashing (300ms on,
100ms off)
Repeater LED
LED state
On
Off
Flashing
April 2020
Description
To access the configuration menus, such as "User Settings".
Use the More.. soft key to access the Config option.
To switch to numeric input mode, accessed using the More.. soft key.
To switch to alphabetic input mode (the default), accessed using the More.. soft key.
Connection status
Connected to IP Office
Not connected to IP Office
Trying to connect to IP Office
Base station mode
The normal operating mode
The base station is powered off
The registration mode
The maintenance mode
The maintenance mode, or the default IP setting mode
Repeater status
Connected to the base station
Not powered or registered to a base station
The searching mode, or attempting to connect to the base station
Installing and Administering D100 SIP Wireless Phones 14