Network Settings - Western Digital Ultrastar Serv60+8 User Manual

User Guide
Figure 466: Security Settings Set
5.4.5 Network Settings
This section provides information related to the network settings for the BMC Web GUI. The Administrator
may enable, disable, or configuring the network settings for the IPv4 Network, IPv6 Network, and VLAN.
When changing any settings related to networking, it is important to notify any users of upcoming changes
to avoid conflicts. Also, ensure that all hosts that are physically connected to the enclosure are available
after the network settings have been changed.
5.4.5.1 Configuring the IPv4 Network Settings
Note: The user is required to log in with a user that has Operator privileges or higher to
configure IPv4 Network Settings. For more information on how to log into the BMC Web GUI,
see: Logging into the BMC Web GUI (page
Step 1 : From the Menu Bar, select Configuration > IPv4 Network.
The IPv4 Network Settings window will appear.
346).
5. System Management
5.4 BMC Web GUI
360