Western Digital Ultrastar Serv60+8 User Manual page 287

Hide thumbs Also See for Ultrastar Serv60+8:

Table of Contents

Step 29 : Uninstall the CPU and Heat Sink module.

a. Locate the CPU and Heat Sink modules.

b. The Heat Sink must be removed by loosening the Torx T30 screws in a specific order. Use

the following diagram to determine the specific order.

c. Slide the Heat Sink clear of the socket alignment pins.

Step 30 : Uninstall the M.2.

a. Locate the M.2 installed on the baseboard.

b. Remove the Philips head screw that secures the M.2 to the baseboard.

Figure 348: Uninstalling the CPU LED Brackets

Figure 349: Heat Sink Removal Order

4. Part Replacement

4.14 Chassis Replacement