Western Digital Ultrastar Serv60+8 User Manual page 265

Hide thumbs Also See for Ultrastar Serv60+8:

Table of Contents

d. Pinch the latch release and carefully press downward to seat the Drive Assembly the rest

Step 26 : Install each drive in the place it was removed from by following the labels or marks that were

added earlier.

Step 27 : Install the CMA(s).

a. Orient the CMA so that the elbow is on the left hand side.

b. Attach all three of the connectors to the brackets on the rails. There should be one at the

elbow side and two at the other end.

Figure 314: Installing a Drive Assembly

Note: CMA has one arm, to be installed at the lower position. This arm should

have the elbow on the left side.

4. Part Replacement

4.13 Rails Replacement